Copper button is a common item in our daily life. It is often used in clothing, shoes, bags and other places. However, if the copper button is used for a long time, it is easy to rust and fade. The main reason why copper button is like this is that it will react with water, so as long as it is possible to avoid contact with water, the color of copper button can be prevented. Maybe someone will say, "this is not nonsense. Don't you wash your clothes?" Please don't worry, and listen to me slowly. How to prevent the copper buttons from fading when washing clothes? In fact, the method is very simple. A small piece of plastic film can solve the problem. With the good adhesion of the film, the button can be completely isolated from the air

Water contact. Let's talk about how to operate it

First of all, cut off the plastic film according to the size of the copper button. The size of the plastic film is twice as wide as the button, and the length should be about twice the width. Cut the plastic film into strips. Then spread the cut plastic film on the button, wrap the whole copper button, gently twist the surface of the plastic film and the copper button, so that there is no air between the plastic film and the copper button. In fact, as long as you pull the plastic film flat and directly contact the surface of the copper button, it will stick firmly. As long as the plastic film is pasted on the button, it can isolate the air. Then put the plastic film growing on both sides of the button and the clothes directly cross 2 circles to make a section, and it is finished. When you do the washing again, the copper button will not touch the water due to the isolation effect of the plastic film. Small copper button does not fade, simple and practical method you learned. Here we should pay attention to the use of plastic film, other plastic film is not sticky, the isolation effect is not ideal.

Source: Jiangmen copper buttonhttp://www.ruihongbutton.com